Greenie512

RAW HT8’s

This is a commission for Adam, who’s recently moved to Brisbane from Canada and along with all his goodies he’s brought a RAW HT8 speaker kit with him. I will build the cabinets and then they’ll be sent to an automotive spray specialist for finishing.

Here’s a thread started by Adam on AudioCircle - http://www.audiocircle.com/circles/index.php?topic=32072.0

All internal braces, dividers and ends. Angles now need cutting and cut outs and holes to braces.

The pictures I have from RAW of the internal braces show a “H” configuration i.e open ends. I don’t like this so I’m using a figure of 8 layout. I drilled out the corners on my drill press, then roughed out the opening with a jig saw, for the life of me I can never get a jig saw to go anywhere near accurate, so internal edges have been tidied up on the router table

Internal bracing ...

Another loose fit to demonstrate final braces [base & front removed]

Here’s Adam’s rendering of final results -
http://www.robotbreeder.com/photography/v/projects/RAWHT8/

continues on page 2