|
Hummm .... must admit here that this is one area I am sadly deficient on. I have yet to master setting up my compressor to the correct pressure and my gun properly to get what I’d call an acceptable result.
Unless you drop on the correct technique (please tell) The best advice I’ve seen is to get someone who is a good spray painter to show you, most people who’ve been through this process seem to have learnt heaps.
I think I just need to spend some time practicing and just keep blasting a board until I crack this one. -
12/08/07 - actually didn’t do to badly on the little FE167e boxes see pics
|
